Maintenance Precautions - Roland MDX-50 User Manual

Maintenance Precautions

Maintenance Precautions

WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
 This machine is a precision device. Carry out daily care and maintenance.
 Carefully clean away cutting waste. Operating the machine with cutting waste present may cause a malfunction.
 Never use silicone substances (oil, grease, sprays, etc.). Doing so may cause poor switch contact.
30
4. Maintenance
Never use a pneumatic blower.
This machine is not compatible with pneumatic blowers. Cutting waste may get inside the
machine and cause fire or electrical shock.
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause fire.
Be sure to perform operations as specified by the instructions, and never touch any
area not specified in the instructions.
Sudden movement of the machine may cause injury or burns.
When using a dust collector to take up cutting waste, exercise caution to prevent fire
and explosions of dust.
Taking up fine cuttings using an ordinary dust collector may result in fire or explosion. Check
with the manufacturer of the dust collector. When the safety of use cannot be determined,
clean the machine using a brush or the like, without using a dust collector.
Caution: High Temperature. Do not touch the spindle unit or the surrounding areas
immediately after cutting has ended.
Doing so may result in burns.
Be sure to remove the cutting tool before performing maintenance.
Contact with the blade may result in injury.