How To Set Overrides; Checking Job/Tool Bur Information During Cutting - Roland MDX-50 User Manual

Built-in Panel Functions

How to Set Overrides

You can set the spindle's feeding speed and rotation speed.
Procedure
A
Press [OVER RIDE].
XYZA : Spindle feeding speed
S : Spindle rotation speed
When the
can set the value.
B
Turn the hand-wheel.
The spindle's feeding speed or number of rotations changes.

Checking Job/Tool Bur Information during Cutting

Procedure
A
During cutting, press [MENU] several times to display the following screen.
The job name and the estimated remaining time are only displayed when they are embedded in the cutting data
sent from the PC.
No. Detail
1
2
3
46
5. Built-in Panel Operation (Practical Use)
mark is lit, you
This displays the name of the job being cut. The job name of processing data that is output from the
SRP Player is converted to a name in accordance with the type of process. The number assigned to the
output order is added to the job name.
Example:
- On SRP Player: Roughing1, Finishing23, Finishing1, ...
- On the panel: ROUGH1, FINISH1, FINISH2, ...
This displays the estimated time remaining and the elapsed time for the data being cut.
This displays the information of the tool bur being used.
The tool bur is displayed with its stocker number. "Name" and "Time" are displayed according to the
details registered for the tool bur in VPanel and can be used to check the tool bur's work time.