Manual Correction" Dialog Box - Roland MDX-50 User Manual

"Manual correction" Dialog Box

- [Correction] tab - [Manual correction]
Distance
A axis back side
Axis angle correction
for the center of rota-
tion
Set the distance correction values.
X, Y, Z Set the correction value (scaling) for each axis.
Detect the rotary axis and correct its position and orientation. This is only enabled when
the (optional) rotary axis unit is attached.
A Set the A-axis inversion correction value.
Set the rotary axis tilt correction value. This is only enabled when the (optional) rotary
axis unit is attached. See the user's manual included with the rotary axis unit.
Point1-X/Point2- Set the numeric values.
X
"Settings" Dialog Box
6. VPanel Operation (Practical Use)
61