Changing The Coordinate System - Roland MDX-50 User Manual

G57-XY
G58-XY
* In NC mode, "User Coordinates - XY" is not displayed.
C
Press [ENTER].
The operation starts. Press [MENU] several times to return to the top window.

Changing the Coordinate System

" P. 22 "User Coordinate System and Machine Coordinate System"
User coordinate system: You can freely set the origin.
Machine coordinate system: The origin position is fixed, so you cannot change the origin setting.
Procedure
A
Press [MENU] several times to display the following screen.
B
Press [COORD.SYSTEM] to select the coordinate system.
This displays the current tool bur position. (Unit: mm)
Each time you press [CO-
ORD.SYSTEM], the coordi-
nate system of the tool bur
position display changes.
Coordinate Systems in RML-1 Mode
 User Coordinates: User coordinate system
 Machine Coordinates: Machine coordinate system
Coordinate Systems in NC Code Mode
 G54 : Workpiece coordinate system 1
 G55 : Workpiece coordinate system 2
 G56 : Workpiece coordinate system 3
 G57 : Workpiece coordinate system 4
 G58 : Workpiece coordinate system 5
 G59 : Workpiece coordinate system 6
 EXFOS : Coordinate system specified by EXOFS
 Machine Coordinates: Machine coordinate system
Cleaning - XY
Workpiece coordinate
system origin 4
Rotation A
Workpiece coordinate
system origin 5
This function is used for cleaning. The spindle
and table move.
The rotary axis unit rotates. This can only be
used when the (optional) rotary axis unit is
attached.
5. Built-in Panel Operation (Practical Use)
Built-in Panel Functions
43