Installing A Ssd/Hdd Drive - Nexcom VTC 6210-R Series User Manual

Chapter 4: System Setup

Installing a SSD/HDD Drive

1. Loosen the thumb screws on the SSD/HDD drive bay and slide the drive
bay out.
Thumb
screws
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
2. Insert the hard drive into the drive bay with the SATA data and power
connector facing towards the end. Align the hard drive's mounting holes
with the mounting holes on the drive bay, and use the provided screws
to secure the hard drive in place.
SATA
data/power
connector
Mounting
screws
31
VTC 6210-R Series User Manual