Chapter 4: System Setup
Installing a WLAN Module (Full Mini-PCIe)
1. Locate the WLAN Mini PCI Express slot (CN17). Insert the module into the
Mini PCI Express slot at a 45 degrees angle until the gold-plated connector
on the edge of the module completely disappears inside the slot. Then
fasten screws into the mounting holes to secure the module.
Mounting
screws
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
Installing an SSD/HDD Drive
1. Loosen the screws on the SSD/HDD drive bay and take the drive bay out.
37
VTC 1021 Series User Manual