Chapter 4: System Setup
Installing a SSD/HDD Drive
1. The SSD/HDD bays on the front are used to install 2.5" hard drives.
Loosen the thumb screws and remove the cover.
Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
Thumb
Screws
2. Place the storage drive into the drive bay with the SATA data and power
connector facing towards the end. Align the storage drive's mounting
holes with the mounting holes on the drive bay, and use the provided
screws to secure the storage drive in place.
49
ATC 8010 User Manual