Symbol Printing Check - Panasonic LP-ABR11 Setup And Operation Manual

7.13 Symbol Printing Check

Term Command
Printing check
PQTX=a,b
output
Items of 2-D
Codes check PQTYPE2D=a
output
Select an
element of
comprehensive
PQITEM2D=a,b,c,･
quality
･･
confirmation
item for 2-D
codes
Outputs OK
(GOOUT) or
NG (NGOUT)
PQOKTH=a
depending on
the checking
result

Symbol printing check is an optional function. (Only for -V type)
Description
Set the printing check output
a= 1: Output the printing check to RS-232C
0: Do not output the printing check to RS-232C (*)
b= 1: Output the printing check to LAN
0: Do not output the printing check to LAN (*)
† A=B if b is omitted.
Set the tems of 2-D Codes check output
a= 1: Output the overall quality for 2-D codes ISO (*)
2: Output the overall quality for 2-D codes AIM
3: Output all the detailed quality for the 2-D codes ISO
4: Output all the detailed quality for the 2-D codes AIM
Set the item of comprehensive qualityfor symbols
a,b,c... : describes all the required items in CSV. It is output as 0
and ignores the other items if it contains 0.
0: Comprehensive judgment (The value of the item of the lowest
grade in 1 to 7) (*)
1: Contrast (ISO) / Cell contrast (AIM)
2: Modulation (ISO) / Cell modulation (AIM)
3: Fixed pattern defect
4: Decode
5: Non-uniformity of axis
6: Non-uniformity of grids
7: Unused error correction
Outputs OK (GOOUT) or NG (NGOUT) depending on the result of
Symbol Printing Check.
a: 0(*), 1, 2, 3, 4
Threshould value to determine if the comprehensive judgement is
OK (GOOUT) or NG (NGOUT). If the value is 0, the judgement is
not performed.
Setting value is more than a

Less than a NG
† This is available only when the setting value of the item PQTX is
PTQX = 1 ,? or PTQX = ?, 1
90
(*)=Default

OK