Panasonic LP-ABR11 Setup And Operation Manual page 43

Lp-abr10 series code reader
Table of Contents

Advertisement

4.2.3 Shutter Speed
(5) Shutter Speed [DDMshutt]
Configures the shutter speed.
If the image is still dark even with the illumination, configure the shutter speed slower
to brighten the image. Note that this may cause a blur. The following 10 speeds can
be specified.
DDMshutt=a
0: 1/60
2: 1/250
4: 1/1000
6: 1/4000
8: 1/8000
4.2.4 Extra Gain Values
(6) Analog Gain [DDMgain]
Specifies the analog gain to be configured on the camera.
Higher value will increased the camera analog gain which will produce a brighter
image.
The following values can be specified.
DDMgain=a
1 (Low) to 4(high)
(7) Digital Gain [DDMexgain]
Specifies the digital gain to be configured on the camera.
Higher value will increased the camera digital gain which will produce a brighter
image.The following values can be specified.
DDMexgain=a
1 (Low) to 15(High)
1: 1/125
3: 1/500,
5: 1/2000
7: 1/6000,
9: 1/10000
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lp-abr12Lp-abr10-c5Lp-abr10-l5

Table of Contents