Reading Parameter - Panasonic LP-ABR11 Setup And Operation Manual

4.2

Reading Parameter

Configure the following parameter if Auto-tuning does not work or when you want to tune
Code Reader manually. This parameter exists for each table of the table mode which is
described later. Set this parameter to the table of your Code Reader. Code Reader
operates referring to the parameter in table 0 if the setting is configured to not use the
table mode.
The following parameters are set to get decodable images:
① Reading Area [DDMcapmode]
② Illumination Control (ON/OFF) [DDMlight]
③ Advanced Setting of internal Illumination [DDMled]
④ Internal Illumination intensity [DDMbrightness]
⑤ Shutter Speed [DDMshutt]
⑥ Analog Gain [DDMgain]
⑦ Digital Gain [DDMexgain]
⑧ Black level adjustment [DDMblack]
⑨ Image Preprocessing [DDMpreproc]
⑩ Mirrored Image [DDMmirror]
40