Panasonic LP-ABR11 Setup And Operation Manual page 68

e.g.) Settings example
IPADR=192.168.0.101/24
IPPORT=60000
GWADR=192.168.0.1
?LAN
<SID=10>[My Reader]
******** STATUS ******** LP-ABR
IP address
Sub net mask
Default gateway (GWADR) : 192.168.209.254 [>> 192.168.0.1]
Barcode port (IPPORT) : 27110 [>> 60000]
Image port (IPPORT2) : 27110 [>> 27110]
Send Barcode IP (IPBAR) : 000.000.000.000:27120
Send Image IP (IPIMG) : 000.000.000.000:27130
connection-retry(RTIME) : 0
session-timeout (STOUT) : 0
MAC address
********* END ********** LP-ABR
System version = M66C-V0.1q
Decode version = M66A-V0.1q
Setup value is displayed enclosed in " [>> " and " ] ".
The dump screen of the computer and Code Reader is displayed as described in the
box above. The contents of the communication is set as follows:
[Current operating status]
IP address
Sub net mask
Default gateway
Port number (only for reading result transmission)
[Setting (Effective at next activation) ]
IP address
Sub net mask
Default gateway
Port number (only for reading result transmission)
† To enable the setting, save to flash memory in WSETS command and
power off to reset.
(IPADR) : 192.168.209.010 [>> 192.168.0.101]
(/n) : 255.255.255.000 [>> 255.255.255.000]
: 00:16:fc:07:ff:f5
68
: 192.168.209.10
: /24
: 192.168.209.254
: 27110
: 192.168.0.101
: /24
: 192.168.0.1
: 60000