Panasonic LP-ABR11 Setup And Operation Manual page 81

Term Command
Total time of TTTX=a (,b)
decoding
Swing Value AGCTX=a (,b)
Table Number TBLTX=a (,b)
Individual MYNAME=a
name
Add individual NAMETX=a
name to (,b)
output data
Contrast CONTTX=a
Information (,b)
CSX=aaa
CSY=aaa
CWX=aaa
CWY=aaa
Quality QTTX=a
Information
Mirrored MRTX=a (,b)
Image
Information
Description
a=0; Disable addition of TTTX for RS-232C(*)
a=1; Enable addition of TTTX for RS-232C
b=0; Disable addition of TTTX for LAN(*)
b=1; Enable Disable addition of TTTX for LAN
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
a=0; Disable addition of AGCTX for RS-232C(*)
a=1; Enable addition of AGCTX for RS-232C
b=0; Disable addition of AGCTX for LAN(*)
b=1; Enable addition of AGCTX for LAN
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
Imaging condition: The value of shutter speed and analog gain settings
a=0; Disable addition for RS232C (*)
RS232C
b=0; Disable addition for LAN (*)
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
Set individual name (31 characters or less) (*) My Reader
a=0; Disable addition of NAMETX for RS-232C (*)
a=1; Enableaddition of NAMETX for RS-232C
b=0; Disable addition of NAMETX for LAN (*)
b=1; Enable addition of NAMETX for LAN
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
a=0; Disable addition of CONTTX for RS-232C( (*)
a=1; Enableaddition of CONTTX for RS-232C
b=0; Disable addition of CONTTX for LAN (*)
b=1; Enableaddition of CONTTX for LAN
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
X-coordinate point of caluculation (Origin)
Y-coordinate point of caluculation (Origin)
X-coordinate point of caluculation (Width)
Y-coordinate point of caluculation (Width)
a=0; Disable addition of QTTX (*)
QTTX
a=0; Disable addition of MRTX for RS-232C (*)
a=1; Enable addition of MRTX for RS-232C
b=0; Disable addition of MRTX for LAN
b=1; Enable addition of MRTX for LAN
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
If it is a mirrored image, add MIRROR_ON
If it is not a mir rored image, add MIRROR_OFF
81
(*)=Default
a=1; Enable addition for
b=1; Enable addition for LAN
a=0 to 1270 a=0 (*)
a=0 to 950 a=0(*)
a=10 to 1280 a=1280(*)
a=10 to 960 a=960(*)
a=1; Enable addition of