Panasonic LP-ABR11 Setup And Operation Manual page 82

Term Command
Symbol XYTX=a (,b)
Position
Information
Delay Time DELAY=a
Cycle Buffer MAXIMG=a
Function
WAITIMG=a
BCC BCCTX=a(,b)
Output data LENTX=a(,b)
length
Description
a=0; Disable output coordinate data to RS-232C (*)
a=1 to 3; Enable output coordinate data to RS-232C
b=0; ; Disable output coordinate data to LAN (*)
b=1 to 3; Enable output coordinate data to LAN
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
a=1; Barycentric coordinates
a=2; Rectangular coordinates
a=3; Barycentric and Rectangular coordinates
Delay time between SYNC input and start capturing
a=0 to 30000 [ms], 10ms step
Number of captured images
a=1 to 16
Capture interval of time when MAXIMG is greater than 1
a=10 to 1000 [ms] 1ms steps
a=0; Disable addition o BCCTX for RS-232C (*)
a=1 to 3; Enable addition of BCCTX for RS-232C
b=0; Disable addition of BCCTX for LAN
b=1 to 3; Enable addition of BCCTX for LAN
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
a=1;LRC(BCC)
a=2;SUM128
a=3;CRC16
a=0; Disable addition o LENTX for RS-232C (*)
a=1 to 2; Enable addition of LENTX for RS-232C
b=0; Disable addition of LENTX for LAN
b=1 to 2; Enable addition of LENTX for LAN
Omit (,b): Set RS-232C and LAN in the same way (=ａ)
a=1;4digits
a=2;5digits
82
(*)=Default
a=0 [ms] (*)
a=1 (*)
a=10 [ms] (*)