Camera Control (1) (For Fixed Gain And Automatic Gain Control Mode) - Panasonic LP-ABR11 Setup And Operation Manual

7.4

Camera Control (1) (for Fixed Gain and Automatic Gain Control Mode)

Term Command
Camera Control AGC=D
Mode AGC=T
CAPMODE=
Left,
Capture area Top,
Width,
Height
DECMODE=
Mode,
Left,
Decode area
Top,
Width,
Height
Illumination
LIGHT=a
Control
Internal CAMled=
Illumination a,b,c,d,e
Illumination CAMbrightness=
Intensity a,b,c,d,e
Shutter Speed SHUTT=a
Analog Gain GCV=a
Digital Gain CAMexgain=a
Black Level
CAMblack=a
adjustment
Description
Set in fixed Set in Fixed Gain Mode (*)
Set in Automatic Gain Control Mode
Capture area
Left 0 to 1275
Top 0 to 955
Width 4 to 1280 1280 (*)
Height 4 to 960 960 (*)
Decode area
Mode 0: Not link with capture area (*)
1: Link with capture area
Left 0 to 1215
Top 0 to 959
Width 64 to 1280
Height 1 to 960 960 (*)
Set ON/OFF of illumination output
a=2; Internal illumination OFF [Fixed]
a=3; Internal illumination ON [Fixed](At imaging) (*)
a=4; External illumination ON (At imaging)
a=5; External illumination ON(Always)
a=6; External illumination ON(During attempting to read:
SYNCMODE=for 1 or 2)
a=7; Interenal and External illumination ON (at imaging)
a=8; For test † DO NOT USE
a=9; Interenal and External illumination ON(During attempting to read)
a=10; For test † DO NOT USE
a=11; Internal illumination ON (During attempting to read)
Set the type of internal illumination source
a: Internal illumination TOP
b: Internal illumination LEFT
c: Internal illumination RIGHT
d : Internal illumination BOTTOM
e: Internal illumination CENTER
Setting of a to e = 0: Illumination OFF1: Illumination ON
a,b,c,d,e = 1,1,1,1,1 (*)
Set the brightness of internal illumination source
a: Internal illumination TOP
b: Internal illumination LEFT
c: Internal illuminatio RIGHT
d: I nternal illumination BOTTOM
e: Internal illumination CENTER
Setting of a to e = 0 (Illumination OFF) to 100 (Brightest)
a,b,c,d,e = 80,80,80,80,80 (*)
a=: 0 to 8
0: 1/60 [sec]
3: 1/500 4: 1/1000 5: 1/2000
6: 1/4000 7: 1/6000 8: 1/8000
9: 1/10000
a=1 (Dark) to 4 (Bright)
a=3 (*)
a=1 (Dark) to 15(Bright)
a=1 (*)
This is a parameter for test. Set it 0 always.
a=0 (*)
83
(*)=Default
0 (*)
0 (*)
0 (*)
0 (*)
1280 (*)
1: 1/125 2: 1/250 (*)、