Operation Mode - Panasonic LP-ABR11 Setup And Operation Manual

3 Operation Mode

LP-ABR has can be operated in following 2 modes.
Operational Mode
Single Reading Mode
Reading Timeout Mode
External Trigger Mode
"Read" includes capturing and decoding an image.
The Diagnostic Mode is available when the operation mode is in Single Reading
Mode.
Diagnostic Mode
Normal Mode
Test Mode
Continuous Reading Mode
Diagnostic Mode is used to configure the reader. Do not use the Diagnostic Mode
in normal operation.
Command Description
SYNCMODE=0 Single read for each SYNC input.
SYNCMODE=1 After SYNC input, the reader
continues reading during the duration
time set by "TOTALLIM". The reader
sends an error code when it fails in
reading when the duration time
passes.
SYNCMODE=2 The reader continues reading during
the SYNC input is active. It receives
no g command (start reading
command) .
Command Description
For normal use and to return to
TEST=0
Normal Mode
For measurement of reading rate of
TEST=1
symbols.
For camera adjustment. To release
continue
the reader from Continuous Reading
Mode, send a "stop" command.
23