Symbologies - Panasonic LP-ABR11 Setup And Operation Manual

7.2

Symbologies

Term Command
Common SET=#M0
SET=#M1
SYMHEAD=#a
SYMFOOT=#a
GS1GS=a
Multi-Labels LABELS=a
OUTFORM=0
OUTFORM=1
OUTFORM=2
OUTFORM=3
SET=$Na-b
SET=$Ca-bbcc
SET=$Sa-b
(*1) Refer to "7.15 Table of Character Code"
Description
Disable all symbologies
Enable all symbologies
Header character for all symbologies
=#a,\bb a=0; Disable (*)
bb; Identifying character (Hexadecimal code (*1))
When omitting "bb", configured identifier will not changed.
Footer character for all symbologies
=#a,\bb a=0; Disable (*), a=1; Enable、
bb; Identifying character (Hexadecimal code (*1))
When omitting "bb", configured identifier will not changed.
Convert characters which indicate the data delimiter of GS1 related
symbols(FNC1)
=a,\bb a=0; Not convert, a=1; convert(*)、
bb; Delimiter after conversion (Hexadecimal code (*1))
When omitting "bb", configured identifier will not changed.
Number of labels
Output in the order of decoding (*)
Output in the order of the specified digit-number
Output in the order of the specified characters
Output in the order of the specified symbologies
Set label number and verification digit number
a=1 to 10; Label number
b=0 to 9999; Digit number
Set label number and verification character
a=1 to 10; Label number
bb; The first character in Hexadecimal
cc; The second character inHexadecimal
(Hexadecimal code (*1))
Set label number and verification symbologies
a=1 to 0; Label number
b; Symbol identifier
a=1; Enable
bb=1D (*) [GS]
a=1 to 10; a=1(*)
78
(*)=Default