Panasonic LP-ABR11 Setup And Operation Manual page 71

[TCP client connection for transmission of reading result]
The reader also works as a TCP/IP client whose access point (IP address: port
number) can be set. Configure the connection timing by the command RTIME
(Connection request interval).
- Connect every time when you send data
- Connect automatically every time the reader is powered on
Once a connection is established, the reader will disconnect in the following
cases.
- The duration time passes (always-on connection is also possible)
- The reader receives a disconnect request from the server/client
- The LP-ABR detects a send error
You can disconnect at any time with discon (forced disconnection) command.
e.g.)
(Command)
[TCP client connection for transmission of image data]
The reader also works as a TCP/IP client whose access point (IP address: port
number) can be set. Configure the connection timing by the command RTIME
(Connection request interval).
- Connect every time when you send data
- Connect automatically every time the reader is powered on
Once a connection is established, the reader will disconnect in the following
cases.
- The duration time passes (always-on connection is also available)
- The reader receives a disconnect request from the server/client
- The LP-ABR detects a send error
You can disconnect at any time with discon (forced disconnection) command.
e.g.)
(Command)

discon IPBAR

discon IPIMG
71