Compliance With The European Machinery Directive; Wiring; Activation Switch - ABB ACS880-107 Hardware Manual

158 The Safe torque off function
Standard
IEC 61508-1:2010
IEC 61508-2:2010
IEC 61511-1:2016
IEC 61800-5-2:2016
EN 61800-5-2:2007
IEC 62061:2015
EN 62061:2005
+AC:2010+A1:2013+A2:2015
EN ISO 13849-1:2015
EN ISO 13849-2:2012
The function also corresponds to Prevention of unexpected start-up as specified by
EN 1037:1995 + A1:2008 and Uncontrolled stop (stop category 0) as specified in
EN 60204-1:2006 + AC:2010.

Compliance with the European Machinery Directive


See Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English]).

Wiring

The following diagrams present examples of Safe torque off wiring for
•
a single inverter unit (page 159)
•
a frame n×R8i inverter unit (page 161)
•
multiple inverter units (page 162)
•
multiple inverter units when an external 24 V DC power supply is used (page 163).
For information on the specifications of the STO input, see chapter
unit (page 47).

Activation switch


In the wiring diagrams below, the activation switch has the designation [K]. This represents
a component such as a manually operated switch, an emergency stop push button switch,
or the contacts of a safety relay or safety PLC.
•
In case a manually operated activation switch is used, the switch must be of a type
that can be locked out to the open position.
•
The contacts of the switch or relay must open/close within 200 ms of each other.
•
An FSO-xx safety functions module or an FPTC-01 thermistor protection module can
also be used. For more information, see the module documentation.
Name
Functional safety of electrical/electronic/programmable electronic safety-
related systems – Part 1: General requirements
Functional safety of electrical/electronic/programmable electronic safety-
related systems – Part 2: Requirements for
electrical/electronic/programmable electronic safety-related systems
Functional safety – Safety instrumented systems for the process industry
sector
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements – Functional
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
Safety of machinery – Safety-related parts of control systems – Part 1:
General principles for design
Safety of machinery – Safety-related parts of control systems – Part 2:
Validation
The inverter control