Applicable Standards; Ce Marking - Pending; Compliance With The European Low Voltage Directive; Compliance With The European Emc Directive - ABB PVS800-57B Hardware Manual

Applicable standards

Standard
EN/IEC 62109-1:2010
EN/IEC 62109-2:2011
EN/IEC 61000-6-2:2005
EN/IEC 61000-6-4:2007
EN55011:2016
(CISPR11:2015)
CE marking – Pending
A CE mark is attached to the inverter to verify that the unit follows the provisions of the
European Low Voltage and EMC Directives.

Compliance with the European Low Voltage Directive


The compliance with the European Low Voltage Directive has been verified according to
standard EN 62109.

Compliance with the European EMC directive


The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. EMC standards EN 61000-6-2:2005, EN
61000-6-4:2007, and EN55011:2016 cover requirements stated for electrical and
electronic apparatus intended for use in industrial environments.
Compliance with EMC standards EN 61000-6-2:2005, EN
61000-6-4:2007, and EN55011:2016 – Pending
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment. Likewise,
the equipment must not disturb or interfere with any other product or system within its
locality.
Name
Safety of power converters for use in photovoltaic power
systems. Part 1: General requirements
Safety of power converters for use in photovoltaic power
systems. Part 2: Particular requirements for inverters
Electromagnetic compatibility (EMC) – Part 6-2: Generic
standards – Immunity for industrial environments
Electromagnetic compatibility (EMC) – Part 6-4: Generic
standards – Emission standard for industrial environments
Industrial scientific and and medical equipment (ISM) radio
frequency disturbance characteristics limits and methods of
measurement
Technical data 59
Certification
Pending
Pending
Pending
Pending
Pending