Standards; Markings - ABB ACS880-107 Hardware Manual

146 Technical data
Inverter modules
Busbars
Package
Disposal

Standards

See Electrical planning instructions for ACS880 multidrive cabinets and modules (3AUA0000102324
[English]).

Markings

See Electrical planning instructions for ACS880 multidrive cabinets and modules (3AUA0000102324
[English]).
PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C Cool Gray) and RAL
9017
PC+10%GF 3.0mm, color RAL 9017
Hot-dip zinc-coated steel sheet 1.5 to 3.0 mm, thickness of coating 20
micrometers, color NCS 1502-Y
Aluminum or copper
Standard package:
• timber, polyethylene sheet (thickness 0.15 mm), stretch film (thickness
(0.023 mm), PP tape, PET strap, sheet metal (steel)
• for land and air transport when planned storage time is < 2 months or
when storage can be arranged in clean and dry conditions < 6 months
• can be used when products will not be exposed to corrosive atmosphere
during transport or storage
Container package:
• timber, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE,
thickness (0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal
(steel)
• for sea transport in containers
• recommended for land and air transport when storage time prior to
installation exceeds 6 months or storage is arranged in partially weather-
protected conditions
Seaworthy package:
• timber, plywood, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film
(PE, thickness (0.04 mm), VCI emitter bags, PP tape, PET strap, sheet
metal (steel)
• for sea transport with or without containerization
• for long storage periods in environments where roofed and humidity-
controlled storage cannot be arranged
Cabinets are fastened to the pallet by screws and braced from the top end to
the package walls to prevent swaying inside the package.
Package elements are attached together by screws.
For handling the packages, see Mechanical installation instructions for
ACS880 multidrive cabinets [3AUA0000101764 (English)].
The drive contains raw materials that should be recycled to preserve energy
and natural resources. The package materials are environmentally
compatible and recyclable.
All metal parts can be recycled. The plastic parts can either be recycled or
burned under controlled circumstances, according to local regulations. Most
recyclable parts are marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and
printed circuit boards can be landfilled. Electrolytic capacitors and printed
circuit boards are classified as hazardous waste within the EU. They must be
removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling
instructions, please contact your local ABB distributor.