Layout Of Cubicle With Frame R1I - ABB ACS880-107 Hardware Manual

20 Operation principle and hardware description
8
5
5
Layout of cubicle with frame R1i...R4i modules in their own compartments (option
+C204)
If option +C204 is selected, each inverter module is installed into its own compartment
behind a door. Up to three inverter modules of frame sizes R1i...R4i can be installed
in one 400 mm wide cubicle.
At the top of the cubicle, there is another compartment which contains the common
DC switch-disconnector and fuses for all the modules in the cubicle.
The inverter modules are installed in an inclined position so that the cooling air flows
from the cool area at the front of the cubicle through the modules into the hot area
at the back. The hot air is exhausted through the roof of the cubicle.
1
2
4 3
3
6
7
Item Explanation
1 Main DC switch fuse for all units in the cubicle
(optional) or main DC fuses
2 DC fuse disconnectors for each individual module
3 Three frame R1i inverter modules
4 Frame R3i inverter module
5 Two frame R4i inverter modules
6 Output connections
7 Cable entries
8 Air outlet compartment with cabinet cooling fan
(not shown)