Locking - VET-PRO VIP 2000 Operator's Manual

From STOP mode, switch the pump off by
pressing the ON/OFF key (continuously
until a beep is sounded)
F
Note:
Important: Use the technique dictated by the IV container provider.
1. Ensure that the pump is not infusing by placing the pump in STOP mode or
turning the pump OFF.
2. Remove the bag spike on the IV set from the empty / used container. Discard
the empty/used container according to the providers instructions.
3. Prepare a new container as per the providers instructions and insert the spike
into the new container.
4. Squeeze the drip chamber (if applicable) to fill approximately halfway with
fluid.
5. Restart infusion.

Locking

The VET-PRO enables the user to lock the programs, on three different
levels.
Level 1 (keys locking)
Level 2 (lock out program)
Level 3 (presetting maximal rates)
Level 1 – key locking
The VET-PRO keys locking function disables all but the info key,
START/OK (during setting mode) and STOP/NO (during operation mode)
keys.
Level – program locking
50
.
The pump cannot be switched off during operation.
WAIT FOR BEEP
VET-PRO Operator's Manual
OFF