VET-PRO VIP 2000 Operator's Manual page 36

Program Setting
F
Note:
: -If one of the values is changed during the programing mode,
Note
the pump will not store the new value, unless the change is
confirmed by pressing the START/OK key.
-If the flush key is activated during data setting, the pump
will return to the original (previous) screen,
has been completed.
The pump will display the last set rate. Change
1.
or press START/OK to confirm.
The pump will display the last set Dose
2.
Volume. Change or press START/OK to
confirm
Adjust the time pause between Doses (up to
3.
20:00 hours), or confirm the last setting by
pressing the START/OK key.
The pump will display the last set Volume
4.
(total volume to be infused). Use the numeric
keys to change or press START/OK to
confirm and start program operation.
During the intermittent program the display
5.
will show continually the actual rate of
infusion.
6. During a pause between the doses, the display
will show the KVO screen.
36
Whenever you decide to set a new program, follow the
instructions at the bottom of the screen.
once flushing
Rate 4 ml/h
Press OK for Volume
Dose Vol: 100 ml
Press OK to continue
Pause
Press OK to continue
Volume 1000 ml
Press OK to start
Rate
Delay 4:00
KVO
VET-PRO Operator's Manual
04:00
5 ml/h
5 ml/h