VET-PRO VIP 2000 Operator's Manual page 34

5.
The pump will calculate all the set data and
display the Maximal rate for the program (to
be infused during Flat period). Press the
START/OK key to start the program.
Setting Program Delay– Refer to page 48.
F
During the stop or data setting mode, use the STOP/NO key to
Note:
return one step backwards: First press will erase the last digit
displayed, once all the digits are erased pressing the STOP/NO
key will display the previous screen .
6. During the TPN program operation, the pump
will display the actual rate and program
direction (Up/Flat/ Down).
Program operation will start from 2 ml/h and
will increase to the maximal rate.
. During the Flat session the rate will not change
and the pump will show the following message:
. During the last part of the program (T3), the
program will start to decrease the infusion rate
according to the set taper down time.
F
If the program must be interrupted
Note:
early, and the planned taper down
time must commence immediately
press the STOP/NO key continually
(2 sec) to stop
and display Taper Down screen.
Set a new time or confirm the default setting. Press the START/OK
key to start the taper down process immediately.
34
the pump operation
T Volume 1256 ml
P
Max Rate: 108 ml/h
N
Press OK to start
U Rate
P
2
F Rate
L
A
108
T
D Rate
O
W
25
N
T
Taper Down: 0:30
P
Press OK key
N
VET-PRO Operator's Manual
ml/h
ml/h
ml/h