Optional Cage Mounting Bracket - VET-PRO VIP 2000 Operator's Manual

Optional Cage Bracket
16
Engage the pole of the bracket in the
slot on the rear of the charging base
(Fig.1). Rotate the clamp wheel until
Fig.1
the pole is held firmly. Ensure that the
horizontal arms of the bracket face
outward and are just above the top of
the pole slot.
Locate the arms of the bracket through
the grille of the cage door (Fig.2 & 3).
The arms should be rested on a
Fig.2
horizontal grille brace (Fig.4).
Stock code 129-050 is suitable for use
on most popular cage manufacturers
doors such as Suburban, Shorline,
Technik and HC Two.
Stock code 129-051 is suitable for use
on cage doors with a mesh size of
50mm x 50mm such as Geeling.
Fig.3
Please contact our sales team if you
need guidance on the suitability of
these brackets for your cage doors.
Fig.4
VET-PRO Operator's Manual