VET-PRO VIP 2000 Operator's Manual page 39

I
Warning
Select the "Modify Program" option and press
4.
the START/OK key.
Use the numeric key to set the code 008 and
5.
press the START/OK key.
If Epidural mode is required (see p.53) use
6.
arrows key to change the setting to ON and
approve using the START/OK key.
To continue with epidural mode OFF, press
START/OK key and move to step 8.
If Epidural Mode was set ON, the user will
7.
have to decide if to set the air alarm on or off.
Use arrows key to change the setting as
required and approve using the START/OK
key.
Press the START/OK key to start new bag and
8.
clear previous program data. Pump will display
bag volume screen - continue to step 9.
Pressing the STOP/NO key will display
program
START/OK key from accumulation screen
will take the VTBI left from previous program
as total vtbi for the new program. continue to
step 10.
9. Pump will display the Bag Volume screen
(with total volume of previous program). Use
the numeric keys to set a new value or approve
the previous value, using the START/OK key.
Pump will display the list of 5 protocols with
10.
drug names. Use the arrow keys to scroll
through the options.
Pressing the START/OK key will display the
rate screen of the chosen protocol.
Pressing the STOP/NO key twice will enable
the user to change the drug name.
VET-PRO Operator's Manual
Always disconnect IV tubing from patient before starting
flushing procedure.
accumulation screen. Pressing
P Select Program
C
=>
Modify Program
A
More
P Enter Code
C
008
A
Press OK key
Epidural Mode
OFF
Adjust ?? & press OK
Air sensor alarm
ON
Adjust ?? & press OK
P
Clear History &
C
Start New Bag
A
P
Bag Vol: 500 ml
C
A
Press OK key
A:MORPHINE
B: METHADONE
C: PETHIDINE
39