Unpacking; Loading The Administration Set - VET-PRO VIP 2000 Operator's Manual

Unpacking:

1.
Carefully remove the pump and charger from the box.
2.
Make sure no items were damaged during shipment
3.
Make sure you have the following items:
•
VET-PRO Infusion Pump
•
Charger
•
Battery Pack
•
Operator's Manual
•
Mains Cable
If any items are missing or damaged, contact your VET-PRO supplier.

Loading the Administration Set

F
Note:
1.
Lift the door latch to open the pump door.
2.
Insert the IV tubing into the tubing guide, following the direction flow label
located above the tubing slot. Insert the tubing from left to right, and avoid
stretching or pulling the tubing. Check key is located in correct position.
3.
Ensure that the distal flow valve is on the right hand side of the pump.
4.
Close the pump door. Press on the door to close firmly, ensure that the latch
is correctly applied.
F
Note:
VET-PRO Operator's Manual
Follow the Instructions supplied with the individual
administration set.
Use of any administration set, other than the original
manufacturers, may impair the operation of the pump and the
accuracy of the infusion.
Ensure that the tubing is inserted completely into the pumping
channel.
ADMINISTRATION SET RE-ORDER CODE 129-010
SUPPLIED IN PACKS OF 25
17