VET-PRO VIP 2000 Operator's Manual page 28

Program Setting
F
Whenever you decide to set a new program, follow
Note:
instructions at the bottom of screen.
Rate over Volume
The pump will display the last set rate.
1.
Use the numeric keys to change or
press START/OK to confirm.
F
During operation the pump allows
Note:
rate
numeric or digital point key.
The rate on the display will change during titration, however
operation rate will change only if the START/OK key is
pressed within 10 seconds confirming the rate change. If the
rate change is not confirmed within 10 seconds, the pump
will continue operation on the original rate, and the display
will return to the previous rate set.
F
From the STOP mode, the user may return to the Rate screen
Note:
by pressing twice on one of the numeric keys.
F
During stop or data setting mode, use the STOP/NO key to
Note:
return one step backwards: First press will erase the last digit
displayed, once all the digits are erased, pressing the
STOP/NO key will display the previous screen .
When the Rate is confirmed, the
2.
pump will display the last set volume
(if the time option is set off). Use the
numeric keys to change the Volume
or press START/OK to confirm and
start the program operation.
Setting Program Delay– Refer to
page 48.
28
titration, by pressing
Rate 500 ml/h
Press OK for Volume
Rate: 500
a
Adjust & press OK
Volume 456 ml
Press OK to start
VET-PRO Operator's Manual
ml/h