25 Steps Protocol - VET-PRO VIP 2000 Operator's Manual

Time setting options:
A.setting 4 digits: 2 first digits will represent hours and the other 2 will
represent minutes
B.setting 2 digits for full hours
C.setting 1 digit for hours and using the digital point to set minutes.
D.using the digital point to set only minutes.
During program operation, the pump
.
will display the rate in which program
is operating.
: -If one of the values is changed during the programming
Note
mode, the pump will not recall the new value, unless changes
are confirmed by pressing the START/OK key.
-If the flush key is activated during data setting, the pump
will return to the original (previous) screen, once flushing is
completed.

25 Steps Protocol

In the 25 steps program, the user can set up to twenty-five different
steps.Each step has its own rate and volume.The steps accumulation is
limited to a Volume of 10 liters. Protocol steps are delivered one after
another, sequentially, until all steps are completed.
Switch the pump ON using the ON/OFF key.
Pump displays program name and status. The
status is either "Lock out" or "program".
(locking and unlocking the pump – see page
50).
30
Rate
250 ml/h
S
25 - Steps
T
E
PROGRAM
P
Press NO to
S
25 - Steps
T
E
LOCK OUT
P
VET-PRO Operator's Manual
change