Functions - Siemens RVP360 Basic Documentation

12/106
Siemens
Building Technologies
Communication with other devices via LPB
Remote control via room unit
Service functions
Frost protection for the plant, the boiler and the house or building
Minimum limitation of return temperature
Minimum and maximum limitation of flow temperature
Maximum limitation of room temperature
Periodic pump run
Pump overrun
Maximum limitation of the rate of setpoint increase
For the programmed heating and d.h.w. circuits and their possible combinations,
refer to chapter 3.2 "Plant types".
2.5 D.h.w. functions
The RVP360 controller is used if one or several of the following d.h.w. functions
is/are required:
D.h.w. storage tank charging through control of a charging pump, with or without
circulating pump
D.h.w. storage tank charging via solar collectors
D.h.w. storage tank charging via electric immersion heater
Own 7-day scheduler program for the release of d.h.w. charging
Legionella function
Selectable priority for d.h.w. heating: Absolute, shifting or parallel
Manual d.h.w. charging
Forced d.h.w. charging
Frost protection for d.h.w.
Basic Documentation RVP360
2 Use
CE1P2546en
2017-07-24