Basics; Key Technical Features; Plant Types; Plant Types With Regard To Heating Circuit - Siemens RVP360 Basic Documentation

Note
Siemens
Building Technologies
3

Basics

3.1

Key technical features

The RVP360 line offers the following key technical features:
The RVP360 controller is supplied with 6 programmed plant types. Illustrations
of the different plant types are contained in chapter 3.2 "Plant types".
The different functions are assigned to the setting levels "End-user", "Heating
engineer" and "Locking level".
The functions are grouped in the form of function blocks
The settings are made via operating lines (see chapter 5 ff.)
Setting level
End-user
Heating engineer
Locking level
3.2

Plant types

When commissioning a plant, the respective plant type must be entered. The
required functions, settings and displays are then automatically assigned, and
parameters that are not required will be hidden.
Plant types are usually made up of 2 heating circuits and a d.h.w. circuit.
Optional functions necessitate extra configurations.
3.2.1

Plant types with regard to heating circuit

In terms of heating circuit, the following plant types are available:
Heating circuit plant type 4: 2 space heating systems with mixing valve
Heating circuit plant type 5: 2 space heating systems with mixing valve and
precontrol with boiler
Heating circuit plant type 6: 1 space heating system with mixing valve, 1 space
heating system with pump circuit, and precontrol with boiler
Basic Documentation RVP360
3 Basics
Function block
Space heating
D.h.w.
General
Plant configuration
Space heating
Pump heating circuit
Actuator heating circuit
Boiler
Limitation of return temperature
D.h.w.
Multifunctional relay
Legionella function
Service functions and general settings
Solar d.h.w.
Locking functions
13/106
CE1P2546en
2017-07-24