Setting Levels, Function Blocks, And Plant Types; Heating Circuit Operating Modes - Siemens RVP360 Basic Documentation

16/106
Siemens
Building Technologies
3.3 Setting levels, function blocks, and plant
types
Op. level Function block
End-user End-user space heating
End-user d.h.w.
End-user general
Heating Plant configuration
engineer
Space heating
Pump heating circuit
Actuator heating circuit
Boiler
Limitation of return temperature
D.h.w.
Multifunctional relay
Legionella function
Service functions and general settings
Solar d.h.w.
Locking level Locking functions
The above table shows ...
which function blocks are assigned to the 3 operating levels,
which function blocks are activated with the different plant types.
3.4

Heating circuit operating modes

The operating mode is selected on the controller as follows:
Select the required heating circuit with button
Press the respective operating mode button
Automatic operation
Automatic switching over from NORMAL to REDUCED temperature,
and vice versa, according to the 7-day program entered
Automatic switching over to holiday mode, and back, according to the
holiday schedule entered
Demand-dependent switching of the heating system according to the
progression of room and outside temperature while giving considera-
tion to the building's thermal inertia (ECO function)
Optional remote control via room unit
Frost protection is ensured
Reduced operation
Continuous heating to the REDUCED temperature
With ECO function
No holiday mode
Remote control via room unit not possible
Frost protection is ensured
Basic Documentation RVP360
3 Basics
Plant type
4-0 4-1 5-0 5-1
1
2
CE1P2546en
6-0 6-1
2017-07-24