Safety; Safety & Environmental Specifications; General; Warnings And Important Notices - Pro Spot PHS-101 Instruction Manual

Battery operated dc spot welding system
Hide thumbs Also See for PHS-101:
Table of Contents

Advertisement

Hybrid Spot

2 Safety

2.0 Safety & Environmental Specifications

2.1 General

2.2 Warnings and important notices

!
!
All Info Copyright © Pro Spot International Inc.
The Hybrid Spot welder is designed for indoor use.
The Hybrid Spot welder is designed to operate from 10º C to 40º C.
Do not operate the unit on a slope of more than 10º.
The Hybrid Spot welder has been designed and is tested to meet strict safety require-
ments. Please read the following instructions carefully before operating the
unit and refer to them as needed to ensure the continued safe operation of the welder.
Information provided in this manual describes the suggested best working prac-
tices and should in no way take precedence over individual responsibilities or
local regulations.
The Hybrid Spot Welder is designed to comply with all applicable safety regulations for
this type of equipment. During operation, it is always each individual's responsibil-
ity to consider:
Their own and other's personal safety.
The safety of the welder through correct use of the equipment in accordance
with the descriptions and instructions provided in this manual.
By observing and following the safety precautions, users of the Hybrid Spot
Spot welder will ensure safer working conditions for themselves and
their fellow workers.
The following types of safety signs are used on the equipment and in Pro Spot's
instruction manuals:
Caution.
Read instruction manual.
Prohibited.
Prohibits behaviour that
can cause injury.
Command.
Calls for a specific action.
Warning.
Notice of personal injury risk and
or damage to equipment.
Warning.
Some parts of the welder may become
hot after prolonged use.
!
Attention!
Lire Mode d'Emploi.
Interdit.
Interdit aux comportements
qui peuvent provoquer des blessures.
Commande.
Appelle à une action spécifique.
!
Avertissement.
Avis de risque de blessure personnelle
et / ou d'endommager l'équipement.
Avertissement.
Certaines parties du soudeur peuvent devenir
chaudes après une utilisation prolongée.
2 Safety
Page 5
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hybrid spot

Table of Contents