Table of Contents
Advertisement
Safety
1. Refer to OSHA for recommended PPE.
2. If any melted plastic comes in contact with your skin, wash with borax soap and
water or alcohol.
3. Make sure you are working in a well ventilated area.
4. Keep chemicals such as gasoline, brake uids and other solvents out of the work area.
5. PVC plastics can produce poison gas when burned and should be kept away from
excess heat and ames.
6. Avoid any contact with your skin when using hot air welders and airless welders as
they can produce very high temperatures when in use.
7. Identify a re extinguisher close enough to use if necessary.
8. Always turn o all welding equipment when repair procedures are complete.
Advertisement
Table of Contents
