7-100
7.2.3.5.3 In/Out Monitor (3) "4.I/O M.HANDLING"
This function displays the ON/OFF status of material handling and mast control switches and analog input
voltages from sensors.
Operating Procedure
Switch (1)
Step 1
Display the "ANALYZER MENU" screen.
Step 2
Press switch (1) 3 times to check that "4. I/O
M.HANDLING" is selected, and press (enter) switch
(4) to display "I/O M.HANDLING 1/7" screen.
NOTICE:
▪ You cannot move directly from "I/O M.HAND-
Switch (4)
LING" screen to the screen of the other items.
Return to "ANALYZER MENU" screen once,
then move to screen of each item.
7 DISPLAY