Option Set Screen "Optionset" - Toyota 8FGU15 Repair Manual

7-128
Indication Description
Setting to enable/disable
T BWD LEVEL *3 backward tilt automatic level-
ing control
SWG W-LOCK Unused (fixed to YES)
Setting to enable/ disable the
KNOB CONT *1
steering knob synchronizer
OCV WAY *1, *3, Setting the number of ways for
*4 oil control valve
Switching output destination
WAY SELECT *3 during C/V 5th way specifica-
tion
FLS Unused (fixed to YES)
*1: These are set according to the vehicle specification at the time of shipment.
*2: 4Y-engine-equipped model only
*3: Mini lever/Joystick specification vehicle only
*4: Please set this setting to the number of ways for oil control valve that is installed on the vehicle.

7.2.5.2 OPTION SET Screen "OPTIONSET"

Operating Procedure
Switch (1) Switch (2)
Step 1
Step 2
Switch (3) Switch (4)
Switching settings
Indica-
Setting content
tion
Enabled
YES
(Default)
-
YES
(Default)
YES Enabled
2->3 / 3->4 (Default)
-
YES
(Default)
Enter the password on the general screen to display
the service function "MASK MENU" screen.
Press switch (1) twice to check that "3. OPTION SET"
is selected, and press (enter) switch (4) to display the
option set setting screen.
NOTICE:
▪ You cannot move directly from level setting
screen of POTION SET to the screen of the
other items. Return to MASK MENU screen
once, then move to level setting screen of
each item.
Indica-
Setting content
tion
NO Disabled
NO -
NO Disabled
2 / 3 / 4 / 5
NO -
7 DISPLAY