"I/O M.handling 3/7"; "I/O M.handling 4/7" - Toyota 8FGU15 Repair Manual

7 DISPLAY

▪ "I/O M.HANDLING 3/7"

POTL: Lift lever angle sensor (1) voltage (V)/lift lever angle
sensor (2) voltage (V)
Displays input voltage from the lift lever angle sensor (1)/lift
lever angle sensor (2) to the controller.
STD lever vehicle:
POTL: - = Always
Mini lever/Joystick vehicle:
Standard:
Lift lever: Rasing
Lift lever angle sensor (1) voltage: 1.8 to 4.1 V
Lift lever angle sensor (2) voltage: 0.3 to 2.9 V
Lift lever: Lowering
Lift lever angle sensor (1) voltage: 0.4 to 2.8 V
Lift lever angle sensor (2) voltage: 1.6 to 4.3 V
LPSOL: Lift proportional valve solenoid current (A)
Displays output current from the controller to the lift propor-
tional valve solenoid.
STD lever vehicle:
LPSOL: - = Always
Mini lever/Joystick vehicle:
Standard when lever is operated: 0.3 to 0.85 A
LSOL: Lift lowering lock solenoid
Refer to "I/O M.HANDLING 1/7"
Switch (4): To "I/O M.HANDLING 4/7" screen

▪ "I/O M.HANDLING 4/7"

POTT: Tilt lever angle sensor (1) voltage (V)/tilt lever angle
sensor (2) voltage (V)
Displays input voltage from the tilt lever angle sensor (1)/tilt
lever angle sensor (2) to the controller.
STD lever vehicle:
POTT: - = Always
Mini lever/Joystick vehicle:
Standard:
Tilt lever: Forward tilt
Tilt lever angle sensor (1) voltage: 1.8 to 4.1 V
Tilt lever angle sensor (2) voltage: 0.3 to 2.9 V
Tilt lever: Backward tilt
Tilt lever angle sensor (1) voltage: 0.4 to 2.8 V
Tilt lever angle sensor (2) voltage: 1.6 to 4.3 V
TPSOL: Tilt proportional valve solenoid current (A)
Displays output current from the controller to the tilt propor-
tional valve solenoid.
STD lever vehicle:
TPSOL: - = Always
Mini lever/Joystick vehicle:
Standard when lever is operated: 0.3 to 0.85 A
TSOL: Tilt solenoid
Refer to "I/O M.HANDLING 1/7"
Switch (4): To "I/O M.HANDLING 5/7" screen
7-103
7