"I/O Engine Ctrl 3/10"; "I/O Engine Ctrl 4/10" - Toyota 8FGU15 Repair Manual

7 DISPLAY

▪ "I/O ENGINE CTRL 3/10"

THA: Intake temperature sensor voltage(V), Intake air tem-
perature(°C)
Display intake temperature sensor voltage(V), Intake air
temperature(°C).
THW: Coolant temperature sensor voltage(V), Coolant
temperature(°C)
Display coolant temperature sensor voltage(V), Coolant
temperature(°C).
PIM: Intake pipe negative pressure sensor voltage(V), In-
take manifold pressure(°C)
Display Intake pipe negative pressure sensor voltage(V),
Intake manifold pressure(°C).
Standard:
3.6 ± 0.3 V (100 ± 10 kPa) (when engine is halted)
Switch (4): To "I/O ENGINE CTRL 4/10" screen

▪ "I/O ENGINE CTRL 4/10"

VPA1: Accelerator pedal position sensor (1) voltage
(standard)
Display Accelerator pedal position sensor (1) voltage
(standard).
Accelerator sensor (1) voltage standard:
0.2 to1.3 V (when accelerator is not operated)
1.4 to 4.1 V (during maximum pressing of accelerator)
Accelerator fully closed position stored value stand-
ard: 0.2 to 1.3 V
VPA2: Accelerator pedal position sensor (2) voltage
(standard)
Display Accelerator pedal position sensor (2) voltage
(standard).
Accelerator sensor (2) voltage standard:
0.7 to 2.0 V (when accelerator is not operated)
2.1 to 4.7 V (during maximum pressing of accelerator)
Accelerator fully closed position stored value stand-
ard: 0.7 to 2.0 V
PA: Accelerator pedal position
Displays operation amount of the accelerator pedal.
Accelerator opening angle standard:
0% (when accelerator is not operated)
100% (during maximum pressing of accelerator)
Switch (4): To "I/O ENGINE CTRL 5/10" screen
7-91
7