"Emrv C01 To Emrv C02" Screen - Toyota 8FGU15 Repair Manual

7-140
Switch (1)
Step 2 Press switch (1) to check that "3. EMRV" is selected,
and press (enter) switch (4) to display the "MAT.
EMRV" screen.
NOTICE:
▪ You cannot move directly from level setting
Switch (4)
Reference: Name plate
4 unit of short No.
Stamp 3 unit aim pressure
(example: 3.5 MPa → 035)
EMRV C01: Electromagnetic relief valve current L
level
EMRV C02: Electromagnetic relief valve current H
level

▪ "EMRV C01 to EMRV C02" Screen

EMRV current level setting screen
Switch (1): Switching selection to next item
Switch (2): Decreasing current level
Switch (3): Increasing current level
Switch (4): Returning to "MATCHING MENU" screen
screen of MATCHING to the screen of the
other items. Return to "MATCHING MENU"
screen once, then move to level setting
screen of each item.
5 unit serial No. and whose 5 unit start from 00001
Stamp the current value that calculated
than an approximate expression
(example: 590 mA → 590)
7 DISPLAY
Mention I-P current rank
(H-L each 1unit)