Matching Mini Lever "Mini Lever"; "Lever1" Screen; "Lever2" Screen - Toyota 8FGU15 Repair Manual

7-138

7.2.6.6 MATCHING MINI LEVER "MINI LEVER"

Matching is performed for mini lever functions.
Operating Procedure
Switch (1)
Step 1 Display the "MATCHING MENU" screen.
Step 2 Press switch (1) to check that "2. MINI LEVER" is se-
lected, and press (enter) switch (4) to display the

"LEVER1" screen.

On mini lever matching screen: Values in bracket ( )
are currently stored value.
Values outside bracket ( ) are current vehicle condi-
tion value.
Switch (4)
NOTICE:
▪ You cannot move directly from each matching
set screen of "MINI LEVER" to the matching
set screen of the other items. Return to
"MATCHING MENU" screen once, then move
to matching set screen of each item.
▪ "LEVER1" Screen
If matching is performed (press switch (1)), "OK" is indic-
ated on the display.
Switch (1): Pressing this for more than 2 seconds will per-
form matching.
Switch (4): To "LEVER2" screen

▪ "LEVER2" Screen

If matching is performed (press switch (1)), "OK" is indic-
ated on the display.
Switch (1): Pressing this for more than 2 seconds will per-
form matching.
Switch (4): To "LEVER3" screen
7 DISPLAY