"I/O Engine Ctrl 5/10"; "I/O Engine Ctrl 6/10"; "I/O Engine Ctrl 7/10" - Toyota 8FGU15 Repair Manual

7-92

▪ "I/O ENGINE CTRL 5/10"

VTA1: Throttle position sensor (1) voltage (standard)
Display throttle position sensor (1) voltage (standard).
Throttle position sensor (1) voltage standard:
0.3 to 1.5 V (during engine idle (after warm-up))
Throttle fully closed position stored value standard:
0.3 to 1.5 V
VTA2: Throttle position sensor (2) voltage (standard)
Display throttle position sensor (2) voltage (standard).
Throttle position sensor (1) voltage standard:
1.7 to 3.3V (during engine idle (after warm-up))
Throttle fully closed position stored value standard:
1.7 to 3.3V
TA: Throttle position
Displays throttle position (° ).
Standard:
1.0 to 8.0° (during engine idle (after warm-up))
IM: Electronic throttle motor current
Displays current flowing to the electronic throttle motor.
Standard: 0.2 to 10.0 A
Switch (4): To "I/O ENGINE CTRL 6/10" screen

▪ "I/O ENGINE CTRL 6/10"

PA: Accelerator pedal position (refer to "I/O ENGINE CTRL
4/10")
NE: Engine speed(rpm), (Traveling speed(km/h or mph))
Display engine speed (Traveling speed).
Engine speed standard: 0 to 3500 rpm
TA: Throttle position (refer to page "I/O ENGINE CTRL
5/10")
Switch (4): To "I/O ENGINE CTRL 7/10" screen

▪ "I/O ENGINE CTRL 7/10"

NE: Engine speed (refer to "I/O ENGINE CTRL 6/10")
PIM: Intake pipe negative pressure sensor voltage, Intake
manifold pressure (refer to "I/O ENGINE CTRL 3/10")
IGT: Ignition timing (spark advance amount)
Displays ignition timing (spark advance amount: ° ).
Standard:
5.0 to 25.0 ° (during engine idle (after warm-up))
Switch (4): To "I/O ENGINE CTRL 8/10" screen
7 DISPLAY