Warning; Parking Brake On Warning/Parking Brake Off Warning; Torque Converter Oil Temperature Overheat Warning; Over Speed Alarm/Diagnostic Code Display - Toyota 8FGU15 Repair Manual

7 DISPLAY

7.1.4.5 Warning

1. Parking brake ON warning
2. Parking brake OFF warning
▪ The buzzer sounds when the operator leaves the seat with the parking brake released.
The buzzer sounds when the operator turns off the key switch with the parking brake released.
The buzzer sounds as well when the operator releases the parking brake within 1 minute after turn-
ing off the key switch.
After the buzzer is sounding for 30 seconds for the warning, it stops sounding.
（No warning is displayed on the multi-function display DX.）

3. Torque Converter oil temperature overheat warning

4. Over speed alarm
5. Diagnostic code display
▪ This indicator blinks and buzzer sounds when the operator
attempts to travel the vehicle without releasing the parking
brake.
▪ The indicator blinks when the oil temperature level be-
comes more than or equal to level 9 (approx. 120 degrees
C).
The entire gauge blinks at level 10 (approx. 135 degrees
C).
▪ When the vehicle speed exceeds the preset speed, the
speedometer blinks and the buzzer sounds to inform the
operator of over speed.
Unlike low speed setting, there is no speed limitation ap-
plied even if the speed exceeds the preset speed.
The over speed alarm value is set up on the operator menu
screen or the administrator menu screen.
But this value can be set up only on the administrator menu
screen when the menu lock is effective.
(Operator menu screen is disable.)
▪
This indicator displays an error code and buzzer sounds
when the diagnosis process in the multi-function display DX
acts.
7-61
7