Transmitting - Uniden Mystic Operating Manual

Mystic OMc.book Page 11 Wednesday, August 13, 2003 5:26 PM
If a signal is received on either Channel 16 or Channel 9, the radio will
change to that channel and remain until the signal ends.
Note: While in Triple Watch mode, you can change the currently
selected VHF channel using the PUSH – SELECT knob.
A momentary press of the [16/9/TRIPLE] key interrupts Triple
Watch mode and causes the radio to remain on channel 16.
Pressing the [16/9/TRIPLE] key again causes the radio to
remain on channel 9. To return to the Triple Watch mode,
simply press the [16/9/TRIPLE] key again.
To cancel the Triple Watch mode, press and hold the [16/9/TRIPLE] key
for 2 seconds.

Transmitting

The Mystic transmits on fifty-five marine frequencies and receives on
eighty marine frequencies. Channel 70 of the USA, International, and
Canadian frequencies, and channel 15, of the USA frequencies, and WX
CH – are for receiving only. The Mystic transmits on channel 70 when
sending DSC information. Your radio will not transmit on these channels.
For your reference, a listing of all the available marine channels are
located on pages 48, 49, and 50.
Before transmitting, set theTX ouput:
Caution: It is important to remember to use the 1W setting in port or for
short range communications.
11