Table of Contents
Advertisement
S2 - medium squelch
S3 - maximum (tight) squelch
1. Press sQuElCh . S displays and the
current squelch level flashes.
2. Press sQuElCh while the squelch level
displays in order to change the squelch
level to the next level.
3. Press and hold sQuElCh to save and exit the squelch setting.
The unit beeps twice on exit.
Selecting a Channel
After turning on your radio, press
scroll though the channels individually.
1. To select a higher channel, press ▲.
2. To select a lower channel, press the ▼.
Press and hold
to scroll rapidly through the channel numbers.
Refer to page 18 through page 23 for a list of the
available channels, corresponding frequencies,
and usage guidelines.
Change Channel Mode
Press UIC to switch between USA, International,
and Canadian Channel modes.
Transmitting and Receiving
The radio uses U.S., Canadian, and International Marine Channels.
Refer to page 18 through page 24 for a list of the available channels and
corresponding frequencies. The radio's maximum RF transmit power
is 3.5 W (HIGH).
1. Hold the radio with microphone approximately 2 inches in front
of your mouth with the antenna at approximately a 45° angle
away from your head.
2. Speak in a clear, normal conversational voice.
E-10
or
for more than 1 second
or
to
HIGH
US
[UP ]
LO
US
[DOWN ]
HIGH
US
Hide quick links:
Advertisement
Table of Contents
