Download Print this page

Uniden Mystic Operating Manual page 37

Full vhf/gps mapping
Hide thumbs

Advertisement

Mystic OMc.book Page 35 Wednesday, August 13, 2003 5:26 PM
Two Data Fields Description — This option displays two boxes at the
bottom of the map that can display data that you choose. Displaying these
data fields is the default for the Meridian.
Possible Map Information Options
Two Data Fields
This option displays two fields at the bottom of the display. These fields
are customizable and can be set to any of 13 different data options.
Street Info
This option displays an information block at the bottom of the display
showing the name of the street your present position or cursor is on. If in
the cursor mode, the bearing and distance from your present position is
displayed.
Horizontal Profile
(Available only with MapSend Topographic data loaded into the Meridian.)
This displays an information box which graphically depicts the horizon in
front of you. The displayed horizion is at the mark displayed on the display
perpendicular to your track. Selecting this option automatically sets the
display orientation to track up and works only in the Position Mode.
Changing to the Cursor Mode will replace the horizontal profile with the
cursor data.
Terrain Projection
(Available only with MapSend Topographic data loaded into the Meridian.)
This displays an information box which graphically depicts the terrain in
front of you. The displayed terrain is approximately from your present
position to the edge of the display. Selecting this option automatically sets
the display orientation to track up and works only in the Position Mode.
Changing to the Cursor Mode will replace the horizontal profile with the
cursor data.
Changing the Data Fields — Allows you to change the data that is being
displayed to 1 of 13 different data options (bearing, distance, speed,
heading, VMG, CTS, ETA, ETE, XTE, turn, elevation, time, or date). Note:
If you have selected Hide Map Info, this option will not be available in the
menu. Also, you must have the Two Data Fields displayed on the Map
screen to be able to customize them.
Press [ESC] when you are done to leave the customize mode.
35

Advertisement

loading

  Also See for Uniden Mystic

  Related Manuals for Uniden Mystic