Uniden Mystic Operating Manual page 45

Mystic OMc.book Page 43 Wednesday, August 13, 2003 5:26 PM
To set USER MMSI code
1.Press ENTER for 2 seconds.
2.Press ENTER at VHF Menu, the VHF menu appears.
3.Press t to select MMSI and press ENTER to confirm user MMSI code.
4.Press ENTER, the following screen appears.
5.You can now enter the USER MMSI code. Press s to increase and
press t to decrease. The number will be entered when ENTER is pressed,
and the blinking digit moves to the right.
6.After the final digit is entered, the confirmation screen appears.
Press ENTER.
Note:You can only program your Mystic twice with an MMSI number.
After that, send your Mystic to Uniden for factory service.
GROUP MMSI
1.Press ENTER for 2 seconds.
2.Press ENTER at VHF Menu, the VHF menu appears.
3.Press t to select MMSI, press t to select Group, and press ENTER.
4.Press ENTER, and the following screen appears.
5.You can now enter the GROUP MMSI code. Press s to increase and
press t to decrease. The number will be entered when ENTER is pressed,
and the blinking digit moves to the right.
6.After the final digit is entered, a confirmation screen appears.
Press ENTER and the MYSTIC returns to the following screen.
U.I.C
The Mystic can transmit and receive, USA, International, and Canada
frequencies. When you turn the Mystic On, USA channel mode is set as
the default.
1.Press ENTER for 2 seconds.
2.Press ENTER at VHF Menu, the VHF menu appears.
3.Press t to select U.I.C.
4.Press ENTER and the following screen appears.
43