5.5
Center Wavelength (Center Frequency) Setting
Procedure
Setting by Pressing the CENTER WL or CENTER FREQ Soft Key
IM 735302-01E
The following are three ways of setting the center wavelength (center frequency).
• Press the CENTER WL or CENTER FREQ soft key.
• Press the START WL/STOP WL or START FREQ/STOP FREQ soft key.
• Use the one-action key (soft key).
The following explains these procedures.
1.
Press CENTER. The soft key menu for center wavelength or center frequency
appears along with the center wavelength or center frequency setting screen.
2.
Press the CENTER WL soft key for center wavelength or the CENTER FREQ soft
key for center frequency.
3.
Enter a center wavelength or center frequency using the rotary knob, arrow keys,
or numeric key pad.
4.
Press nm/ENTER.
Note
•
It is not necessary to press nm/ENTER when using the rotary knob or arrow keys.
•
The set value is applied to the measurement conditions area.
•
When a setting is changed,
•
If a value outside the setting range is entered, the nearest permitted value is set.
For instructions on switching the wavelength and frequency displays, see section 5.2.
appears in the measurement conditions area.
1
2
3
4
5
6
7
8
9
10
11
App
Index
5-15