Table of Contents
Advertisement
8.3
Saving/Loading Displayed Data
Procedure
Saving Trace Data
Setting the Type of the File to Be Saved to TRACE
8-6
Waveforms displayed by the instrument and waveforms temporarily saved to internal
memory can be saved to a USB storage medium or the internal memory, and loaded
from the USB storage medium.
Do not remove the USB storage medium or turn the power OFF while the USB
storage medium access indicator is blinking. This can damage the data on the
medium or the device itself. Also, always place a USB storage medium in the
removable state (following the procedure in section 8.1) before removing it.
1.
Press FILE. The soft key menu for saving and loading data appears.
2.
Press the ITEM SELECT soft key. The menu for selecting the type of files to be
saved is displayed.
3.
Press the TRACE soft key. TRACE is selected, and the screen returns to the
previous stage.
4.
Press the WRITE soft key. The TRACE LIST is displayed on screen.
CAUTION
File list
Trace list
IM 735302-01E
Advertisement
Table of Contents
