Table of Contents
Advertisement
4.3
Entering Numerical Values and Strings
Entering Numerical Values
Direct Entry Using the Numeric Keypad
Entry Using the Rotary Knob and Arrow Keys
IM 735302-01E
You can use the numeric keypad, rotary knob, or arrow keys in the DATA ENTRY section.
1.
Press the soft key of a parameter. The currently set value is shown in the
parameter input window.
2.
Press a numeric keypad key. The numeric keypad input area appears, and the
number of the pressed key is displayed.
3.
After entering a numerical value, press the μm/ENTER or nm/ENTER key
depending on the unit of the input parameter. The value in the numeric keypad
input area appears in the parameter input window, and is set internally. If a
parameter does not have a unit associated with it, you can use either the μm/
ENTER or nm/ENTER key.
If you make an error when inputting values with the numeric keypad:
4.
Press BACK SPACE. The last (right-most) entered character in the numeric
keypad input area is removed, allowing entry of the correct character.
Note
•
If the value entered with the numeric keypad is not in the allowed value range, the nearest
allowed value will be set.
•
By holding the BACK SPACE key down, you can erase the entire entry in the numeric
keypad input area and make the numeric keypad input area disappear, returning to the
condition preceding numeric keypad input.
2.
Continuing on from step 1, turn the rotary knob, or press an arrow key. The
currently set value is changed.
3.
When you press the COARSE key the digit of the setting to be changed rises,
or the numeric value increase/decrease step increases. Press the COARSE key
again to restore the previous digit/step.
When COARSE is selected, the COARSE key lights.
DATA ENTRY
Rotary knob
COARSE
BACK
7
8
9
SPASE
4
5
6
m/
1
2
3
ENTER
.
-
nm/
0
ENTER
Arrow keys
Numeric keypad
1
2
3
4
5
6
7
8
9
10
11
App
Index
4-5
Advertisement
Table of Contents
