Sampling Point/Interval Settings - YASKAWA AQ6370B User Manual

5.8

Sampling Point/Interval Settings

Procedure
IM 735302-01E
The following are three ways in which the number of samples can be entered.
• Setting the number of samples directly
• Setting by the sampling interval
• Automatically setting the optimum number of samples or the sampling interval
according to the sweep width (span) and resolution setting
1.
Press SETUP. The soft key menu for sweep condition settings appears.
2.
Press the SAMPLING POINT or SAMPLING INTERVAL soft key to set the
sampling point or sampling interval, respectively. To automatically set the sampling
points and interval according to the span and wavelength (frequency) resolution
settings, press SAMPLING POINT AUTO. The sampling points or interval setting
screen is displayed.
If you pressed SAMPLING POINT AUTO, the sampling points and interval are set
automatically.
3.
Enter a number of samples or interval using the rotary knob, arrow keys, or
numeric key pad.
4.
Press ENTER. The sampling points or interval are set.
Note
• The instrument displays
the resolution are inappropriate. When
possible.
• See section 5.7 for the corrective actions when
if the settings for span, the number of sampling points, and
is displayed, normal measurement is not
is displayed.
1
2
3
4
5
6
7
8
Automatic setting
Sets
9
sampling points
Sets
sampling interval
10
11
App
Index
5-27